Geek glossary: stub

July 6, 2013 Andrew Bruce

Over the next few blog posts I intend to bang a few more nails in the coffin of the widespread misunderstanding of stubs, mocks and spies. Many before me have had a crack at this (see Ben Moss’s post for discussion and links), and many of those blog posts and books helped me to understand what exactly these code design tools are for. I’m still no expert, but I do think about the application of these tools with unhealthy frequency.

I intend to focus primarily on the usage of these terms inside the Ruby ecosystem, but these definitions also apply to other languages.

Let’s start with stubs. They’re a useful TDD and design tool. They are not mocks, and they arguably precede mocks in the history of TDD tooling. Like most terms surrounded in confusion, there are a few applications of the same idea:

  • Pure stub objects
  • Partial stub objects
  • Stub methods
  • Stub protocols
  • Stub services

In general, however, a stub is a simplistic implementation of a role that is played in a system. The purpose of a stub is to guide execution down a particular path, usually to verify that another, unstubbed part of the system is doing its job properly.

Pure stub objects

Perhaps most commonly, stubs are used in a unit test to replace collaborators of the system under test. They allow the tester to avoid exercising code that belongs to other units. By replacing these collaborators, they give the test writer control over the indirect inputs to the system under test.

This sort of language mangling deserves an example. Let’s say we have two objects in the system with the same interface. They’re swapped out in production code depending on whether the user wants a cached or uncached URL fetch.


Now, we are testing a user interface that lets someone click on buttons that perform the above actions. We have an example in RSpec that involves user error:

it "displays an error when the fetcher decides an invalid URL has been entered" do
  fetcher = double('fetcher')
  ui =
  expect(ui).to display_error('You entered a bad URL!')

Note how we’re explicitly describing behaviour up to a boundary: this test doesn’t care how the stub object raises the exception. Note also how we haven’t stubbed any existing methods on existing classes. This is deliberate: it drives out polymorphism in the design. The UI object can use any fetcher that responds to the #fetch message. We should not need to change this test or the UI implementation when we make a change to what constitutes an invalid URL. We are free to construct the UI with different objects and we should expect it to work providing its fetcher collaborator does its job.

We can also say that using a pure stub object helps us to drive composability into our application. If we have proved that one object can work with any object that implements an interface, we have a clear contract that a new implementation needs to fulfil in order to work correctly with that object.

In some languages these contracts are explicit. Java has interfaces and Objective-C has protocols. In Ruby, interface contracts are implicit. If you feel the need to enforce a contract, they can be tested with shared examples.

Partial stub objects

Partial stub objects are concrete objects that have had some of their implementation changed. These are popular with Rubyists who believe you shouldn’t need to change your design when a test barks at you. I’m not one of those people. However, in some situations it makes sense to stub methods on existing objects, notably when working with existing code that wasn’t designed for polymorphism, or to be composable. Rails, in particular, makes using pure stub objects quite difficult in several places.

Stub methods

We stubbed a method in our example above. When we stub an existing method on an object to make a partial stub object, we are ‘stubbing out’ a method. This particular verb form of stub leads many to believe that stubbing is only applicable to existing objects. In turn, this leads to some wild arguments that stubbing is bad practice.

With RSpec’s stubs, it’s important to understand the difference between Example#stub (now deprecated in favour of Example#double) and Object#stub. The former creates a pure test double (which can be a pure stub object), and the latter stubs a method on an existing object (whether it exists or not). Compare:

double('payment gateway')


PaymentGateway.stub(:process_card) { true }

The former returns a new, ’empty’ stub object that will explode if any message is called on it. This is an advantage: we usually want a whitelist of messages that are allowed to be called on an object in a particular test example. Whitelisting messages forces our tests to expose the messages of our domain in the tests, which enhances readability and brings complexity to the foreground when it arises.

The latter couples the test to the concrete implementation, ‘PaymentGateway’, as well as to the message. In general, it’s best to reduce coupling of type. This isn’t always a problem, though, and many Rails apps in particular have test suites that are opinionated about type. See Jim Weirich’s talks on connascence for a detailed treatment of the various levels of sin associated with coupling. See POODR for a translation into Ruby.

Stub protocols

I’ve included this section to talk about libraries like WebMock. WebMock
is used primarily, despite the confusing name, to stub out low-level network layers. This allows the programmer to pretend an HTTP request responded in a certain way, timed out or failed in some way. It can also be used to ‘catch’ any stray code that the programmer didn’t expect to be calling out to the network.

Whilst WebMock is technically implemented as a bunch of partial stubs, its use tends not to suffer the downsides of partial stubs listed above, because the interfaces it stubs are stable and widely used. Further, because WebMock is so popular, it’s likely to be updated when changes to the Ruby built-ins it stubs change.

I tend to use WebMock in high-level acceptance tests when I don’t want to call external services. I want to know that the whole of my application’s stack was exercised, but don’t particularly care whether a real network request was made and completed successfully.

Stub services

Finally, let’s look at stub services. These are wildly different to the rest of the stub types described, in that they are simplistic implementations of whole applications that serve some purpose in a system. They may talk HTTP to other services, but will often have a developer- or product manager-facing user interface that allows them to be configured to respond in particular ways.

Using stub services allows one system to be tested in isolation from potentially unreliable external systems. For example, it is tricky to reproduce a time out error occurring in an external system if you have no control over that system. But if you can configure the system you are verifying to instead talk to a replacement service that you do have control over, you can easily reproduce different situations that you need to accommodate in your application.

About the Author


More Content by Andrew Bruce
Oh, the programs you'll DRY!
Oh, the programs you'll DRY!

Someone just told you your code isn’t DRY, and you have no idea what they’re talking about. You’re fresh ou...

SASS from a developer eyes
SASS from a developer eyes

I enjoy writing CSS more than the average developer, and I like when I have tools that can help me write be...

Enter curious. Exit smarter.

Register Now